10:1 ratio
Removing stains from carpet and upholstery. Spray Olympic Cleen 5 to 10 cm from stain, agitate area with spray nozzle and absorb stain with clean dry cloth.
50:1 ratio
Apply directly into tank and spray as normal, (solution can be varied to suit pressure), more pressure = less solution. Spray stubborn stains and agitate with the nozzle of the spray bottle if needed and clean as normal.
20:1 to 100:1 ratio
Apply a mist of Olympic Cleen over the whole area intended for polishing. Shine with clean dry cloth.
20:1 to 100:1 ratio
Mix Olympic Cleen solution, spray onto clean dry cloth and wipe keyboard keys and mouse. Will de-static screens and monitors with no streaks.
10:1 ratio
Mix into compound instead of water or spray over the cutting compound to eliminate buff and swirl marks. Also removes cutting compound from plastic moldings and rubber.
5:1 ratio
Spray Olympic Cleen directly to parts to be de-greased, agitate with paint brush or similar and then rinse off with water. Can be used in a dipping tank to soak parts.
5:1 ratio
Spray Olympic Cleen directly to floor and use mop or broom to clean surface, let sit several minutes and mop, hose or pressure clean area.
10:1 ratio
Spray Olympic Cleen on to exhaust stain, allow to sit for several minutes then wipe off with a clean dry cloth.
10:1 ratio
Removes silicon and mastic. Removes rust and weather marks and animal droppings. Spray Olympic Cleen solution and allow to sit for several minutes. Clean with a clean dry cloth.
20:1 ratio
Spray on Olympic Cleen solution and clean area with clean dry cloth. Follow the grain of the timber for a better finish.
20:1 ratio
Mist Olympic Cleen over area to be defogged. Buff area dry with absorbent paper towel or clean dry cloth. Area should remain defogged for up to 5 days. Also works on perspex. Ideal for ski & welding goggles, safety glasses, scuba masks and grinding masks.
20:1 ratio
Apply a mist of Olympic Cleen on to the soiled area and agitate stain with the nozzle of the spray bottle before washing. Ideal as a pre-spray on clothing. (avoid satin. silk and suede) The results are astonishing. Removes, ink, blood, grass, make-up, oil, tar and grease.
10:1 ratio
Spray on Olympic Cleen solution directly to surface and allow to sit for several minutes then mop up with sponge or mop. If cleaning a large area, mix several capfuls of Olympic Cleen directly into a mop bucket of clean water and mop as usual.
10:1 ratio
Spray Olympic Cleen on to surface, place tissue paper over residue and respray. Allow to sit for several minutes and rub off with dry clean cloth.
10:1 ratio
Spray Olympic Cleen on area to be cleaned, buff area with clean dry cloth.
10:1 ratio
Spray Olympic Cleen on solution and allow to sit for several minutes. Remove stains by wiping with a clean dry cloth.
5:1 ratio
Soak in solution for several minutes.
10:1 ratio
Soak in Olympic Cleen solution for several minutes, remove with a clean dry cloth.
10:1 ratio
Spray Olympic Cleen on area to be cleaned and remove excess silicone or urethane with a clean dry cloth. Spray area again and rub on the spot, wipe off any remaining residue.
20:1 ratio
Spray on Olympic Cleen solution and allow to sit for several minutes and remove stains with clean dry cloth.
20:1 to 100:1 ratio
Spray on Olympic Cleen solution and wipe off with clean dry cloth. Follow the grain of the stainless steel for a better finish.
10:1 ratio
Apply a mist of Olympic Cleen over the area to be welded. Weld directly over the area , then wipe off any spatter, No nasty smoke fumes or greasy residue left, ready for painting or powder coating.
20:1 to 100:1 ratio
Apply Olympic Cleen solution directly onto surface and polish as normal, using a clean dry cloth.