
Printing Ink 5:1 Ratio
To clean , dampener rollers & remove ink from your machine, floor & clothing.

Scuff Marks 5:1 Ratio
Soak in solution for 2 to 3 minutes, remove with a dry absorbent towel.

Ovens, Hot Plates, BBQ & Burnt Surfaces 5:1 Ratio
Pre-heat oven/hot plate/surface to warm, apply generous amounts of Spray to surface, scourer stubborn areas and rinse. no nasty fumes.

Sticky Tape Residue 5:1 Ratio
Spray on to surface, place tissue paper over residue and respray allow to sit for five minutes and simply rub off.

Bad Carpet & Rug Stains 10:1 Ratio
Spray 5 to 10 cm from stain, agitate area with spray nozzle or brush and absorb stain with clean dry cloth.

Chewing Gum 10:1 Ratio
Poke holes into gum, Spray on and around chewy, let soak 5 min. use a coin or flat edge and agitate around gum until it releases from material or carpet. On fabric prone to water staining, spray mist over the entire area and soak up or absorb with clean dry cloth.

Nicotine Build-Up 10:1 Ratio
Spray on solution allow to sit for I to 2 minutes and remove with clean dry cloth.

Tile Grout 10:1 Ratio
Spray on solution allow to sit for 2 to 3 minutes and remove with pressured water

Bathroom Scum & Plaque 10:1 Ratio
Spray on solution allow to sit for 1 to 2 minutes and remove with cloth or sponge.

Smoke Damage 10:1 Ratio
Spray mist over the entire area and soak up or absorb with clean dry cloth.

Floor Mats 10:1 Ratio
Spray mist over the entire area and soak up or absorb with clean dry cloth. Leaves a fresh lemon smell.

Mildew 10:1 Ratio
Spray on solution allow to sit for 1 to 2 minutes and remove with pressured water or brush

Laminated Surfaces 10:1 Ratio
Spray on solution allow to sit for I to 2 minutes and clean area with a clean dry cloth.

Marble & Granite 10:1 Ratio
Spray on solution allow to sit for 1 to 2 minutes and remove with cloth or sponge

Outdoor Furniture 10:1 Ratio
Spray on solution allow to sit for 1 to 10 minutes and pressure hose off mould and mildew

Carpet & Upholstery 20:1 Ratio
Removing stains from carpet and upholstery. Spray 5 to 10 cm from stain, agitate area with spray nozzle and absorb stain with clean dry cloth.

Plastics 20:1 Ratio
Spray on solution allow to sit for 2 minutes and remove stains with clean dry cloth

Soft Leather 20:1 Ratio
Spray on solution allow to sit for 1 to 2 minutes and remove stains with clean dry cloth.

Linoleum Floors 20:1 Ratio
Spray on solution allow to sit for 3 to 5 minutes and mop up with sponge mop. If a large area mix Spray Cleen directly into the bucket, let sit, then mop back with clean water

Stainless Steel Food Surfaces 20:1 Ratio
Spray on solution and wipe off with potable water as normal.

Laundry Pre-Spray 20:1 Ratio
Apply a mist over the whole area intended for washing. Ideal as a pre-spray on clothing. (avoid satin. silk and suede) The results are astonishing, removes, ink, blood, grass, make-up, oil, tar and grease.

Carpet Steam/Shampoo 20:1 Ratio
Apply directly Into tank and spray as normal, (solution can be varied to suit pressure), more pressure = less solution. prespray stubborn stains and clean as normal.

Finished Wood Surfaces 20:1 Ratio
Spray on solution allow to sit for a minute and wash as normal.

Computer 20:1 Ratio
Mix solution, spray onto rag and wipe keyboard keys. mouse and will destatic screen with no streaks.

Windows, Glass & Mirrors 100:1 Ratio
Apply solution directly onto surface and polish as normal, using a clean dry cloth.

Chrome & Stainless Steel 100:1 Ratio
Apply a mist over the whole area intended for polishing. Shine with clean dry cloth.