Driveways & Workshop Floors - 5:1 Ratio
Spray or bucket and broom floor, let sit for 10 minutes and hose or pressure spray off. Agitate with brush or broom.
Degreasing Motor Parts 5:1 Ratio
Spray on or soak in solution, agitate with paint brush or similar rinse off in water. Can be used in a dipping tank to soak parts. Will not damage aluminium parts like caustic degreasers.
Rusted & Frozen Bolts 5:1 Ratio
Soak in solution for 2 to 3 minutes, scourer stubborn areas and rinse.
Scuff Marks 5:1 Ratio
Soak in solution for 2 to 3 minutes, remove with a dry absorbent towel.
Panel Shop 5:1 Ratio
One cap of concentrate into wet rub bucket, eliminates static, silicone and oils build-up. prevents fisheyes, swirls and bubbles. Removes: overspray off brake and tail lights, tyres, glass and interiors, silicone or door jams, tyres and interiors.
Cutting Compound 5:1 Ratio
Mix into compound instead of water to eliminate buff and swirl marks.
Welding Spatter Guard 10:1 Ratio
Apply a mist over the whole to be welded. Weld directly over area No nasty silicone smoke or greasy residue, ready for painting or powder coating.
Glass & Mirror Defogging 10:1 Ratio
Mist over area to be defogged. buff area dry with absorbent paper towel, area should remain defogged for up to 5 days. Also works on perspex. Ideal for ski & welding goggles, safety glasses, scuba masks and grinding masks.
Fibreglass 10:1 Ratio
Spray on solution allow to sit for I to 2 minutes and remove with dry absorbent towel. Removes rust and weather marks on boats. Also great around the water line to remove sludge and canal grime.
Car Wash 100:1 Ratio
Mix 1 to 2 cap fulls into bucket, wash normally. Helps to reduce streaking when drying.
Paint Oxidation 10:1 Ratio
Cover area to be cleaned, buff area with clean dry cloth.
Brake Dust 10:1 Ratio
Spray on solution allow to sit for 5 to 10 minutes and remove with pressured water.
Silastics, Silicone & Urethane 10:1 Ratio
Spray product and remove excess with rag. Spray again and rub on the spot
Carpet & Upholstery 20:1 Ratio
Removing stains from carpet and upholstery. Spray 5 to 10 cm from stain, agitate area with spray nozzle and absorb stain with clean dry cloth.
Carpet Steam/Shampoo Cleaner 20:1 Ratio
Apply directly Into tank and spray as normal, (solution can be varied to suit pressure), more pressure = less solution. prespray stubborn stains and clean as normal.